Edge CNC Lathe Gage 13-000

• The CNC Lathe Gage by Edge Technology is used to set lathe tools on the spindle axis for optimum cutting conditions.
• To use this gage first adjust it to match the angle of your slant bed lathe and install the 1/4″ shaft in a collet or chuck.
• Then set one of the contact faces of the gage on the cutting edge of the tool.
• Next adjust the tool until the bubble is centered in the level.
• This procedure ensures the cutter is accurately placed on a plane that intersects the rotational axis of the spindle. (Note: it is necessary for the lathe to be leveled for the CNC Lathe gage to work properly)
• Set turning, boring, and facing tools on spindle axis for optimum cutting conditions
• Precision glass vial level with 30’/ 2mm sensitivity
• Cutter contact faces designed to work with tools that have cutting edges facing up as well as facing down
• Angular adjustability of +/- 60 to match any lathe slant bed angle
• Hands free design
• Ground steel shaft supported by dual ball bearings.
• Durable anodized finish with easy-to-read engraved marks
• Made from high strength aluminum